Stack 'N Stove

Our Stack 'N Stove complete chimney solution offers a fully integrated wood burning Stove, Flue, Stack and Chimney system for new buildings or extensions. Quicker and cheaper to build, but carbon neutral. Complete wood burning stove, flue, stack and chimney from Ł3,500 delivered across the UK. Simple to install at a large discount to traditional brick chimneys, the complete system can be installed in a day.

The stack is made of twin skin fully insulated galvanised steel (also available in stainless steel if it has to be run outside) that simply slots together. Being insulated it allows the fire to draw as the internal running temperature is high. The high temperature also prevents volatile hydrocarbons condensing within the stack, helping it to remain clean. The insulation means that the external temperature of the stack is normally less than 70 degrees C, which means that it can be boxed in with plasterboard, all you need to leave is a 50mm air gap. This means that the second floor boxing in is only 338mm square, which is generally 75% or more less space than a traditional chimney.

The LiteStack chimney is made from fibreglass and can easily be handled and fixed by two tradesmen. Prior to delivery we will send a finished sample to ensure you are satisfied with the brick and mortar match. The chimney is pre fitted with a stainless steel section of the stack so it simply slots on to the stack. The fixing of the chimney to the roof is by bolt.

Two contemporary wood burning stoves by the Danish company Varde are offered; a modern free standing Eclipse wood burning stove, and an in-line version are available that can be built into a wall. These stoves are not the cheapest on the market, but offer good design and build quality from a premier manufacturer. Beware of cheap stoves as the castings are likely to crack!

	Significant cost savings over traditional chimney build cost Small stack size gives large space saving Chimney stack to match any brick, mortar and roof pitch combination Carbon neutral heating with very good SAP rating Much quicker to construct No wet trades Add value to your development High quality in-line or free standing stove of exceptional efficiency
	Easy fit; very fast and simple bolt on fixing Match and brick and mortar combination, with sample sent before delivery Comes in a variety of styles All roof pitches catered for Indistinguishable from traditional chimneys No wet trades
	Insulated stack; high internal temperature, low external temperature Adaptable for any building type Simply box in with plasterboard Boxing in only 300 x 300mm - over 75% smaller than a traditional chimney!
	Attractive designs available in free standing or in-line Exceptional heating efficiency High quality Danish manufacturer Easy to use and clean

We can deliver the Stack 'N Stove complete chimney system anywhere in the country, so please call or register your interest by completing our internet enquiry form below. We will also require more information on the type of Chimney you will require, so please print off a chimney specification form which can be completed and faxed back.

Name:
E-mail:
Contact Number:
Town/ City:

Stack 'N Stove

Stack 'N Stove Enquiry Form